Knife Wizard Commercial Electric Knife Sharpener

The KE280 is a totally new concept in commercial knife sharpening featuring a patented cushion contact system, which not only produces edges sharper than when the knife was new, but also creates a polished finish - eliminating the need for honing."

How the 280 Knife Sharpener works...

There are 2 closed-cell rubber covered wheels, each carrying endless abrasive rolls. The left wheel sharpens the left side of the blade and the right wheel, the right side.

The drive motor produces enormous torque (see tech info) which allows the use of fine abrasive this, together with the cushion contact system produces a razor sharp smooth cutting edge which does not require honing on a steel.

During sharpening, the knife is supported at the correct angle by the check plates. Cleaning and replacement of the abrasives is simplicity itself, taking less than 1 minute. Other than this, there is no maintenance required.

Virtually all knives and most cleavers can be bought to razor sharpness by an unskilled operator in seconds.

Japanese steel knives can be sharpened perfectly on the KE280. Special sharpening instructions are enclosed with each machine

Technical Information.......

Pressure moulded frame in polyurethane
Extremely powerful electric motor torque 3000 gcm
Abrasive wheels rpm 250
Geared transfer drive
Drive shaft in hardened steel with 2 pinions carried in 3 phosphor bronze bearings
Drive axles in hard steel with crown wheel drive transfer
UK voltage and fuse protected (5a). 3 pin plug provided
Weight unpacked 2.2kg
12 month guarantee